Stainless Steel · Nickel Alloy
Stainless steel and nickel alloy exporter from Mumbai.
SS 202, 304, 316, duplex and nickel alloy pipes, tubes, bars, sheets and coils, manufactured in Mumbai since 1980 and exported to 79 markets. Supplied across India too, with most orders leaving the yard within two days.
- 16
- Product forms
- 18
- Grades
- 22
- Industries served
- 79
- Export markets
Four decades of holding the material other people have to order.
Rajgranth began in 1980 as a family trading company dealing in stainless steel raw materials. Four decades on, it manufactures, stocks, trades and exports — self-funded throughout, and carrying no debt.
- 1980
- Trading since
- 48 hrs
- Typical despatch
- Zero
- Debt
- ISO 9001:2015
- Certified
- 18
- Testing facilities
- 6,000 M.Tons
- Production capacity
- 150
- Countries already exported to
- 38
- Quality control engineers
- 6
- Continents served
Forty years of experience in metal. Family-owned, beginning in stainless steel raw-material trading.
Most orders are completed from held stock within two days.
A cash-flow business, self-funded since inception.
Quality management system certification.
From spectrometry and PMI to hydrostatic, eddy current and ultrasonic testing.
Capacity stated in metric tonnes, across manufacturing and machining.
The export reach published on our original website.
Engineers dedicated to quality control.
Export across the Middle East, Africa, Europe, Asia, North America and South America.
Stainless steel and nickel alloy, from one yard.
Two material families, supplied as pipe, tube, bar, sheet, fittings, fasteners and precision components.
SS 202 and stainless steel, exported from Mumbai.
We export SS 202, 304, 316, duplex and nickel alloy pipes, tubes, bars, sheets and coils to 79 markets, with EN 10204 3.1 mill certificates and Incoterms quoted to your port.
Export destinations
SS 202 stainless steel
The cost-effective austenitic grade for kitchenware, furniture, decorative tube and interior fabrication, supplied as pipe, tube, bar, sheet, plate and coil.
Every form stainless is supplied in, and the grades that matter in each.
Start from the product, the grade or the industry — all three routes reach the same specification.
Seamless Pipes
Seamless pipe from 1/8″ NB to 40″ NB, in schedules 5 through XXS, across austenitic, duplex and high-alloy grades.
Seamless Tubes
Seamless tube specified by outside diameter and wall thickness, for heat exchanger, boiler, condenser and instrumentation service.
Round Bars
Round, square, hexagonal and threaded bar from 10 mm to 300 mm, in six delivery conditions and tolerance classes H7 to H10.
Sheet & Plate
Sheet and plate across the full austenitic, ferritic, duplex and high-alloy range, in mill and polished finishes.
Pipe Fittings
Buttweld, forged, investment cast, olet, bar stock, dairy, ferrule and furniture fittings.
Precision Components
CNC and VMC machined components to drawing, across 14 processes and 13 materials, verified on CMM.
Specify by what the material has to survive.
Composition, corrosion behaviour, strength and standards cross-referenced — including the limitations, which matter more than the strengths when a specification goes wrong.
- 304 / 304LPREN 19
The default austenitic stainless. 18% chromium, 8% nickel, no molybdenum.
UNS S30400 / S30403EN 1.4301 / 1.4306 - 316 / 316LPREN 25
304 plus 2–3% molybdenum. The standard answer to chlorides and mild acids.
UNS S31600 / S31603EN 1.4401 / 1.4404 - 904LPREN 35
High nickel, high molybdenum, with copper. Built for sulphuric acid service.
UNS N08904EN 1.4539 - Duplex / Super DuplexPREN 41
Roughly equal austenite and ferrite. Around twice the yield strength of 316L.
UNS S31803 / S32205 / S32550 / S32750 / S32760EN 1.4462 / 1.4507 / 1.4501 - 254 SMOPREN 43
6% molybdenum super-austenitic with nitrogen. PREN above 42.
UNS S31254EN 1.4547 - 17-4 PHPREN 20
Martensitic PH grade. Machine soft, then age to tensile strengths above 1300 MPa.
UNS S17400EN 1.4542
Manufactured, machined and verified in house.
Fourteen machining processes across CNC, VMC and sliding-head equipment, with eighteen testing facilities covering chemistry, mechanical properties, integrity and dimension.
Machining processes
14- Turning
- Boring
- Honing
- Plating
- Milling
- Burnishing
- Polishing
- Assembly
- Slotting
- Threading
- Grinding
- Drilling
- Tapping
- Heat Treatment
Testing facilities
18- Spectrometer
- Chemical Testing Laboratory
- Positive Material Identification (PMI)
- Spectro Test
- Tensile Testing Machine
- Hardness Testing Machine
- Portable Hardness Tester
- Flattening Test
- Reverse-Bend Test
- Hydrostatic Test Machine
- Eddy Current Testing Machine
- Ultrasonic Thickness Gauge
- Air Under Water Test
- Borescope Test
- Metallurgical Microscope
- Surface Roughness Tester
- Dial Vernier Caliper
- Intergranular Corrosion Test
The problem each sector is actually solving.
Every industry page names the corrosion or service condition that drives selection, then the grades and forms that answer it.
Oil & Gas
Sour service, chloride-bearing produced water and high-pressure duty, onshore and offshore.
Chemical
Mixed acid service, wide temperature ranges and process chemistry that changes between campaigns.
Petrochemical
Cracking, reforming and polymer service at temperature, with sulphur and chloride exposure.
Pharmaceutical
Cleanability, surface finish and documented material traceability from mill to installation.
Power & Energy
Boiler, superheater and condenser service, plus flue gas cleaning downstream.
Marine & Shipbuilding
Seawater, splash zone and cargo service, where chlorides are permanent rather than occasional.
Our reach to industries like & many more
Shipped to 79 markets across six continents.
Material test certificates to EN 10204 3.1 as standard, third-party inspection to 3.2 on request, and export documentation prepared with the shipment.
- Middle East13
Saudi Arabia · Iran · Iraq · United Arab Emirates · Qatar · +8
- Africa10
Nigeria · Algeria · Angola · South Africa · Libya · +5
- Europe23
Russia · Norway · Germany · France · Italy · +18
- Asia14
India · Singapore · Malaysia · Indonesia · Thailand · +9
- North America09
United States · Canada · Mexico · Panama · Costa Rica · +4
- South America10
Argentina · Bolivia · Brazil · Chile · Venezuela · +5
The other half of the business: buying alloy that never reaches the open market.
The import division exists because a great deal of perfectly serviceable high-value alloy never reaches the open market. It sits as mill excess, as stock made obsolete by a design change, or as material released when a project closes. RGM buys those lots internationally, verifies what they actually are, and sells them on to buyers who need the grade rather than the paperwork of a fresh mill run.
Trading, then stock, then manufacturing, then the world.
- 1980
Trading begins
The business is founded as a family trading company dealing in stainless steel raw materials.
- Growth
Stockholding
Trading builds into held inventory — the capability that still defines RGM, with most orders now despatched from stock inside two days.
- Expansion
Manufacturing
In-house production of seamless and welded pipe and tube, bar, and precision CNC-machined components.
- Today
Export and import
Supply across six continents, alongside an import division sourcing high-temperature, nickel, cobalt and titanium alloys.
- Next
Second generation
The business passes to the next generation of the family, still self-funded and still debt-free.
The questions buyers actually ask before they specify.
Written to be useful whether or not you buy from us.
304 vs 316 stainless steel
What the molybdenum actually buys, and the point at which 316 stops being enough.
Seamless vs welded pipe
Where the weld seam matters, where it does not, and what the cost difference really is.
What is an MTC?
EN 10204 3.1 and 3.2 explained, and why the difference decides whether material is accepted on site.
- 01
Quality Products
All products manufactured by us pass through a stringent quality control system.
- 02
ISO Certified
We are an ISO 9001:2015 Certified as well as certified by many leading certification companies.
- 03
Timely Delivery
Our robust logistics infrastructure help us to deliver products globally on time.
Manufacturer and Stockholder of Stainless Steel Pipes and Tubes in Mumbai, India.
We are Family Owned Company established back in 1980. RGM Start as a Trading company deal with stainless steel Raw Material. After 40 Year of long journey & huge experience now Rajgranth Metals & Alloys deals in multiple businesses as a Manufacturer, Stockholder, Exporter, and Supplier in India and all over the world.
Our Vision
We are committed to offer competitive advantage to our customers through quality products.
Our Mission
To strive in sustaining and strengthening our place as a leader in the manufacturing of Metal & Alloys.
Our Team
Integrity & Innovative, Optimistic, Courageous and Commitment to Commitment.
Material from the mills and producers you already trust.
What makes us proud is not that most of our brands are category leader, but the value that they add to our consumers' everyday lives.
FAQ
06Common questions
- Do you keep material in stock?
- Yes. Rajgranth is a super stockholder — one of the larger held inventories of stainless steel in India — covering pipe, tube, bar, sheet, plate, coil, fitting and fastener forms across the common grades and sizes.
- Is there a minimum order quantity?
- No. We supply single lengths and small quantities from stock as readily as full project tonnages. Tell us what you need and we will quote it.
- Do you export, and to which countries?
- Yes. Rajgranth exports to markets across the Middle East, Africa, Europe, Asia, North America and South America — around 79 markets in total. International enquiries are handled by a dedicated export desk.
- Are you ISO certified?
- Yes. Rajgranth operates an ISO 9001:2015 certified quality management system covering manufacturing, stockholding and despatch. The certificate is available on request.
- Do you publish a price list?
- Stainless steel and nickel alloy prices move with the nickel and alloy surcharge and the metal market, so a fixed published list would be out of date quickly. We give a firm quotation on enquiry, usually the same working day.
- How do I get a quote or place an order?
- Use the Request a Quote builder to specify material, form, grade, dimensions and quantity, or contact the sales desk directly by phone, email or WhatsApp. Quotes are typically returned the same working day.